Preliminary Inspection

IMPORTANT: The following steps must be completed before using the symptom tables.

1. Perform the A Diagnostic System Check before using the symptom tables in order to verify that there are no Body Control Module (BCM) DTCs set.
2. Review the system operation in order to familiarize yourself with the system functions. Refer to the following:
^ Seat Belt System Operation
^ Seat Belt System Circuit Description

VISUAL/PHYSICAL INSPECTION
^ Inspect for aftermarket devices which could affect the operation of the seat belts system. Refer to Checking Aftermarket Accessories in Diagrams.
^ Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.

INTERMITTENT
Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent and Poor Connections in Diagrams.

SYMPTOM LIST
Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:
^ Fasten Safety Belt Indicator/Chime Always On
^ Fasten Safety Belt Indicator/Chime Inoperative