Daytime Running Lamps (DRL) - Export

The DRL control module is designed to automatically operate the exterior lights when the engine is running. The DRL control module activates the low beam headlamps and tail lamps under the following conditions:
- The engine is running.
- The park lamps are OFF.

The DRL control module receives voltage from the Park Lamp Fuse through CKT 1340 and the HVAC/DRL Fuse through CKT 241. The park lamps and/or the headlamps may be operated manually at any time by using the headlamp and the Instrument Panel (IP) lamp dimmer switch. The DRL module will not operate if the system voltage is less than 9 volts or greater than 18 volts.