General Description

- The headlamp switch on the instrument panel controls the headlamps. Turn the headlamp switch in order to light both of the headlamps and parking lamps. When the headlamp switch is turned, the following lamps will be lit:
- Headlamps
- License lamps
- Parking lamps
- Tail lamps
- Sidemarker lamps
- The turn signal/headlamp dimmer switch lever on the steering column controls the high-beam headlamp operation. In order to change the headlamp operation from low beam to high beam (or high beam to low beam). Pull the turn signal/headlamp dimmer switch lever to the full back position (until the detent is felt) and release. The high-beam indicator (blue) in the instrument cluster will light during the high-beam headlamp operation.
- The turn signal/headlamp dimmer switch lever can be used to flash-to-pass. In order to flash-to-pass, pull the turn signal/headlamp dimmer switch lever back until both the low-beam and the high-beam headlamps are lit. DO NOT pull the lever past the detent. The low-beam headlamp operation will resume when you release the turn signal/headlamp dimmer switch lever to the original position.