Rear Seat Armrest Replacement

Rear Seat Armrest Replacement

Removal Procedure





1. Remove the rear seat. Refer to Rear Seat Replacement (Rear Seat Replacement) .
2. Remove the J retainer on the bottom edge of the seat back cover.
3. Reach underneath the seat back cover.
4. Release the C-clip from the armrest pivot shaft while pushing in on the armrest.
5. Remove the armrest from the seat.



Installation Procedure





1. Install the armrest to the seat.

Important: During the removal of the armrest, ensure that you reset the C-clip (open end facing down) into the slotted shaft if the armrest C-clip disengages from the slotted shaft.


2. Press firmly inward on the armrest in order to seat the C-clip onto the armrest pivot shaft.
3. Install the J retainer at the bottom edge of the seat back cover.
4. Install the rear seat. Refer to Rear Seat Replacement (Rear Seat Replacement) .
5. Reposition the seat back to the original position.