Front Side Door Adjustment (Body Side)

Front Side Door Adjustment (Body Side)





1. Remove the front fender liner in order to gain access to the body side hinge bolts. Refer to Fender Liner Replacement (Fender Liner Replacement) in Body Front End.
2. Loosen the 13 mm upper and lower body side hinge bolts (1) .
DO NOT remove the bolts.
3. Loosen the 10 mm cone adjuster body side hinge bolt (2) .
DO NOT remove the bolt.
4. Adjust the door fore and aft in order to reposition the door as needed.



Installation Procedure






Notice: Refer to Fastener Notice in Cautions and Notices.

1. Install the 10 mm cone adjuster body side hinge bolt (2).

Tighten the bolt (2) to 10 N.m (89 lb in).

2. Install the two (1) 13 mm upper and lower body side hinge bolts.

Tighten the bolts (1) to 33 N.m (24 lb ft).

3. Install the front fender liner. Refer to Fender Liner Replacement (Fender Liner Replacement) in Body Front End.