Using RDS Mode (UN0, UL0, UP0)

The audio system is equipped with a Radio Data System (RDS). RDS mode gives you many useful new features. With RDS, the radio can:
^ Seek only to stations with the types of programs you want to listen to.
^ Seek to station with traffic announcements
^ Receive announcements concerning local and national emergencies.
^ Receive and display messages from radio stations.

RDS features are only available for use on FM stations which broadcast RDS
information. The RDS features of you radio rely upon receiving specific RDS information from these stations. These features will only work when the RDS information is available. In rare cases, a radio station may broadcast incorrect information that will cause the radio features to work improperly. If this happens, please contact the radio station. When you are tuned to an RDS station, the station name will appear on the display, instead of the frequency. Most RDS stations provide there station name, the time of day and Program Type (PTY) for their current programming.

For a description of the RPO Code(s) shown in this article, refer to the RPO Code List found at Vehicle/Application and ID. Application and ID