Setting the Tone - 1

BASS
Follow the following steps to set the bass.
1. Press and release AUDIO repeatedly until BAS appears on the display.
2. Press and hold the UP arrow to increase the bass. "B" and a positive number will appear on the display.
3. Press and hold the DOWN arrow to decrease the bass. "B" and a negative number will appear on the display.
4. "B" and a zero will appear on the display when the bass is set to the middle position.
5. Release the UP or DOWN arrow when you find the bass level you want or when the maximum or minimum level is reached.

TREBLE
Follow the following steps to set the treble.
1. Press and release AUDIO repeatedly until TRE appears on the display.
2. Press and hold the UP arrow to increase the treble. "B" and a positive number will appear on the display.
3. Press and hold the DOWN arrow to decrease the treble. "B" and a negative number will appear on the display.
4. "B" and a zero will appear on the display when the treble is set to the middle position.
5. Release the UP or DOWN arrow when you find the bass level you want or when the maximum or minimum level is reached.
6. If a station is weak or noisy, you may want to decrease the treble.

AUTO CENTER FUNCTION
Follow the following steps to reset the bass, treble and speaker controls.
1. Select the desired tone control.
2. Press and hold AUDIO for more than two seconds until you hear a beep.
3. "B" and a zero or "T" and a zero will appear on the display.
3.1. To set all the tone and speaker controls to the middle setting.
3.2. End out of the audio mode.
3.3. Press and hold AUDIO for more than two seconds until you hear a beep.
3.4. CEN will appear on the display.