15. Crankshaft Balancer Removal

^ Tools Required
- J 39046 Crankshaft Balancer Remover





1. Remove the crankshaft pulley retaining bolts.
2. Remove the crankshaft pulley.





3. Remove the crankshaft balancer retaining bolt and washer.





4. Using the J 39046 remove the crankshaft balancer.


Engine Front Cover Removal





1. Remove the oil pan to front cover retaining bolts.
2. Remove the front cover to block retaining bolts.

Notice: Perform TDC Offset Recovery procedure if the timing chain, timing gears, engine front cover, crankshaft position sensor, crankshaft or other components affecting the timing are replaced.

3. Remove the front cover.





4. Remove the turbocharger oil feed line.
5. Remove the turbocharger oil feed line fitting.