Luggage Carrier Replacement (Utility)

Luggage Carrier Replacement (Utility)

Removal Procedure





1. Remove the rubber side rail cap from the center rail support.
2. Remove the screws from the center supports.
3. Remove the screws from the end supports.
4. Remove the luggage carrier from the roof.




5. Remove the center rail supports.
6. Remove the screws (3) from the side rail supports (2).
7. Remove the side rail supports (2) from the side rails (1).
8. Remove the screws (5) from the cross rails (6).
9. Remove the cross rails (6) from the sliders (4).
10. Remove the screws (5) from the sliders (4) and the lock plates (7).
11. Remove the sliders (4) from the slots in the side rails (1).



Installation Procedure





1. Place the sliders (4) into the slots in the side rails (1).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the screws (5) into the sliders (4) and the lock plates (7).

Tighten the slider to side rail screws to 3 N.m (27 lb in).

3. Place the cross rails (1) onto the sliders (4).
4. Install the screws (5) into the cross rails (6).

Tighten the cross rail screws to 2 N.m (18 lb in).

5. Connect the side rail supports (2) to the side rails (1).
6. Install the screws (3) into the side rail supports (2).

Tighten the side rail support screws to 2 N.m (18 lb in).





7. Install the center rail supports.
8. Place the luggage carrier onto the roof.
9. Install the end support to vehicle screws.

Tighten the screws to 3 N.m (27 lb in).

10. Install the screws into the center supports.

Tighten the screws to 3 N.m (27 lb in).

11. Place the rubber side rail cap over the center rail support.