Window Run Channel Replacement - Front Door

REMOVAL PROCEDURE




1. Remove the window.
2. Remove the window glass weatherstrip.
3. Remove the glass run channel bolts.
4. Remove both glass run channels from the door.

INSTALLATION PROCEDURE




1. Install both glass run channels to the door.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install both glass run channel bolts.

Tighten
2.1. Tighten the front bolt to 9 N.m (80 lb in).
2.2. Tighten the rear bolt to 9 N.m (80 lb in).

3. Install the window glass weatherstrip.
4. Install the window.