Jack and Tool Stowage Replacement (Tahoe/Yukon)

Jack and Tool Stowage Replacement (Tahoe/Yukon)

Removal Procedure





1. Tilt forward the drivers side rear seat bottom.
2. Turn the wing nut counterclockwise.
3. Remove the tool kit.




4. Open the door on left rear of vehicle below speaker grille.
5. Turn the adjusting knob on jack counterclockwise.
6. Remove the jack from vehicle.



Installation Procedure





1. Install the tool kit.
2. Turn the wing nut clockwise.
3. Tilt down the back drivers side rear seat bottom.




4. Install the jack to vehicle
5. Turn the adjusting knob clockwise.
6. Close the door in left rear of vehicle below speaker grille.