Arm Rest: Service and Repair

Armrest Bracket Replacement

Tools Required

J 34940 Rivet Gun


Removal Procedure

1. Remove the trim panel.
2. Remove the water deflector.




3. Remove the armrest bracket from the door.

1. Drill out the rivets using a 1/4 drill bit.
2. Disconnect the control rods from the retainers.

4. Remove the retainers and the U-nuts from the bracket.



Installation Procedure





1. Install the retainers and the U-nuts to the bracket.
2. Install the armrest bracket to the door.

1. Connect the control rods from the retainers.
2. Use the J 34940 in order to install the bracket rivets.

3. Install the water deflector.
4. Install the trim panel.