Z82 - Trailering Pigtail - Electrical Installation Instructions

IMPORTANT: Please consult your brake controller instruction on how to wire your controller with these circuits.

1. The brake controller pigtail and 40 A B+ trailering MaxiFuse has been provided with the HD trailering option.
Plug in the 6 Way connector into the body wiring harness junction block which is located on the upper left of the drivers footwell.
2. Plug-in the 40 Amp B+ trailering MaxiFuse in stud #1 location of engine wiring harness junction block.
The brake controller jumper blunt cut circuits have been identified as follows:




Individual Conductors

For a description of the RPO Code(s) shown in this article refer to the RPO Code List found at Vehicle/Application ID RPO Codes