Speedometer Adapter Replacement

Speedometer Adapter Replacement

Removal Procedure




1. Remove the speedometer adapter module wiring harness connector (3) from the upper left side of the steering column bracket (2).
2. Release and remove the push pins (1) from the upper left side of the steering column bracket.
3. Remove the speedometer adapter module (4) from the vehicle.

Installation Procedure




1. Install the speedometer adapter module (4) to the vehicle upper left side of the steering column bracket (2).
2. Install push pins (1). Replace component, if damaged.
3. Install the speedometer adapter module wiring harness connector (3) to the upper left side of the steering column bracket.