55. Intake Manifold Disassemble - Lower

Intake Manifold Disassemble (Lower)

1. Remove the MAP sensor retainer nut.
2. Remove the MAP sensor retainer.
3. Remove the MAP sensor.

4. Remove the fuel rail bolts and stud.
5. Remove the fuel rail.

6. Remove the coolant outlet housing bolts.
7. Remove the coolant outlet housing.
8. Remove the thermostat.

9. Remove the thermostat bypass fitting, if required.

10. Remove the engine coolant air bleed fitting (1), if required.
11. Remove the ECT sensor hole plug (2), if required.