Range Selector Replacement (Push Button Console)

Range Selector Replacement (Push Button Console)

Removal Procedure




1. Remove the three screws securing the rear cover to the push button selector bracket.
2. Disconnect the electrical connector from the rear of the push button selector.




3. Remove the four screws securing the front housing, retainer, and push button selector to the instrument panel.

Installation Procedure




1. Install the four screws in order to secure the front housing, retainer, and push button selector to the vehicle.




2. Connect the electrical connector to the rear of the push button selector.
3. Install the three screws in order to secure the rear cover to the push button selector bracket.