85. Exhaust Manifold Installation - Right

Exhaust Manifold Installation (Right)





Notice: Refer to Fastener Notice in Cautions and Notices.

1. Install the exhaust manifold studs, if removed.

Tighten the exhaust manifold studs to 30 Nm (22 lb ft).

Important: Make sure the 7.4 marking on the gasket is facing away from the cylinder head.


2. Install the exhaust manifold gasket.
3. Install the exhaust manifold.
4. Install the exhaust manifold nuts and center bolt.

1. Tighten the exhaust manifold nuts to 30 Nm (22 lb ft).
2. Tighten the exhaust manifold bolt to 54 Nm (40 lb ft).




5. Install the spark plug heat shields.
6. Install the spark plug heat shield nuts.

Tighten the spark plug heat shield nuts to 20 Nm (15 lb ft).




7. Install the spark plug wire boots onto the spark plugs.