Valve Rocker Arm Cover Replacement (Left)

Removal Procedure





1. Remove the engine cover. Refer to Engine Cover Replacement.
2. Remove the oil filler tube and bolt.





3. Disconnect the engine coolant temperature (ECT) sensor electrical connector.





4. Remove the PCV valve hose assembly from the intake manifold and the valve rocker arm cover.
5. Remove the rear spark plug wire retainer from the support.
6. Remove the valve rocker arm cover. Refer to Valve Rocker Arm Cover Removal (Left).
7. Clean all sealing surfaces and the valve rocker arm cover. Refer to Valve Rocker Arm Cover Clean and Inspect.

Installation Procedure





1. Install the valve rocker arm cover and bolts. Refer to Valve Rocker Arm Cover Installation (Left).
2. Install the PCV valve hose assembly to the intake manifold and in the valve rocker arm cover.
3. Install the rear spark plug wire retainer to the support.

Notice: Refer to Fastener Notice in Service Precautions.





4. Install the oil filler tube and bolt.
Tighten the bolt to 25 Nm (18 ft. lbs.).





5. Connect the ECT sensor electrical connector.
6. Install the engine cover. Refer to Engine Cover Replacement.