Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Rear Floor Mat/Carpet Replacement (B38)



Rear Floor Mat/Carpet Replacement (B 38)

Removal Procedure

1. Remove the seats and the risers. Refer to Bucket Seat Replacement (Bucket Seat Replacement) in Seats
2. Remove the engine cover. Refer to Engine Cover Replacement (Engine Cover Replacement)
3. Remove the trim plates from the following doors. Refer to Carpet Retainer Replacement (Carpet Retainer Replacement)

* The front
* The rear side
* The rear

4. Remove the cowl side panel trim. Refer to Cowl Side Trim Panel Replacement (Cowl Side Trim Panel Replacement)
5. Remove the right front side door lock pillar garnish molding.
6. Remove the body side front lower trim panel. Refer to Body Side Front Lower Trim Panel Replacement (Body Side Front Lower Trim Panel Replacement)
7. Remove the left body side trim panel. Refer to Body Side Trim Panel Replacement - Left Side (Body Side Trim Panel Replacement - Left Side)
8. Remove the right body side trim panel. Refer to Body Side Trim Panel Replacement - Right Side (Body Side Trim Panel Replacement - Right Side)
9. Remove the bolt that retains each cargo net anchor to the floor of the vehicle (if equipped).




10. The carpet bezels are retained by sonic weld and are not to be removed.




11. Remove the carpet from the vehicle.



Installation Procedure





1. Install the carpet into the vehicle.




2. The carpet bezels are retained by sonic weld and are not to be removed.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the bolt that retains each cargo net anchor to the floor of the vehicle (if equipped).

Tighten the bolt that retains each cargo net anchor to the floor 2 N.m (18 lb in).

4. Install the right body side trim panel. Refer to Body Side Trim Panel Replacement - Right Side (Body Side Trim Panel Replacement - Right Side) .
5. Install the left body side trim panel. Refer to Body Side Trim Panel Replacement - Left Side (Body Side Trim Panel Replacement - Left Side) .
6. Install the body side front lower trim panel. Refer to Body Side Front Lower Trim Panel Replacement (Body Side Front Lower Trim Panel Replacement) .
7. Install the cowl side panel trim. Refer to Cowl Side Trim Panel Replacement (Cowl Side Trim Panel Replacement) .
8. Install the right front side door lock pillar garnish molding.
9. Install the trim plates from the following doors. Refer to Carpet Retainer Replacement (Carpet Retainer Replacement) .

* The front
* The rear side
* The rear

10. Install the engine cover. Refer to Engine Cover Replacement (Engine Cover Replacement) .
11. Install the seats and the risers. Refer to Bucket Seat Replacement (Bucket Seat Replacement) in Seats.