Bracket Replacement - Rear Wheel Opening Flare (ZR2 Models)

Cladding Replacement - Rocker Panel

Removal Procedure

1. Remove the screws from the cladding.
2. Remove the retainers from the wheelhouse.
3. Remove the nut on the back of the cladding from the stud.
4. Remove the cladding from the retaining rail.
5. Remove the retaining rail screws.
6. Remove the retaining rail from the body.



Installation Procedure

1. Install the retaining rail to the body.
2. Install the retaining rail screws.
3. Install the cladding to the vehicle.
4. Install the nut on the back of the cladding to the stud.
5. Install the screws into the cladding.
6. Install the retainers into the wheelhouse extension flange.