Stabilizer Bushing: Service and Repair

REMOVAL PROCEDURE





1. Using paint, place match marks (3) on the stabilizer shaft next to the insulators (2).





2. Remove the 2 stabilizer shaft insulator bracket bolts (7) and the bracket (6).
3. Remove the stabilizer shaft insulator.

INSTALLATION PROCEDURE

IMPORTANT: For correct installation of the stabilizer shaft, align the paint match marks (3) on the stabilizer shaft with the stabilizer shaft insulators (2).





1. Install the stabilizer shaft insulator (2) to the stabilizer shaft.





2. Install the stabilizer shaft insulator bracket (6) to the stabilizer shaft (5). Secure with 2 bolts (7). Do not tighten the bolts.

NOTICE: Refer to Fastener Notice in Service Precautions.

IMPORTANT: Ensure the vehicle's weight is on the tires and wheels. Ensure that the stabilizer shaft (5) is centered, side-to-side, and the insulators are aligned with the match marks on the stabilizer shaft.

3. Verify that the stabilizer shaft links (9) are set at a neutral position, as seen from above.
- Tighten the stabilizer shaft insulator bracket bolts (7) to 23 Nm (17 ft. lbs.).