Rear Door Window Regulator: Service and Repair

REMOVAL PROCEDURE

IMPORTANT: The rear door power window motor and regulator replacement parts are sold as an assembly. Do not attempt to separate the motor from the regulator before verifying that separate replacement parts are available.




1. Remove the window.
2. Disconnect the power window motor electrical connector, if equipped.
3. Remove the electrical harness retainers, if equipped.
4. Drill out the rivets that secure the window regulator to the door.
5. Remove the window regulator and the motor assembly (power windows only) from the door

INSTALLATION PROCEDURE




1. Install the window regulator and the motor assembly (power windows only) to the door.
2. Install the rivets that secure the window regulator to the door.
3. Install the electrical harness retainers, if equipped.
4. Install the window.