Rear Quarter Trim Panel Replacement (Base Utility)

Rear Quarter Trim Panel Replacement (Base Utility)

Removal Procedure

1. Remove the rear seat. Refer to Rear Seat Replacement Service and Repair.
2. Remove the armrest from the quarter panel trim.
3. Remove the rear blower motor trim cover.
4. Remove the cargo door pillar molding.
5. Remove the rear door lock pillar molding.
6. Remove the front door lock pillar molding.
7. Remove the quarter panel trim screws.






8. Remove the quarter panel trim from the vehicle.

Lift the quarter panel to release the quarter panel from the vehicle.

Installation Procedure, Right Side






1. Install the quarter panel trim to the vehicle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the quarter panel trim screws.

Tighten
Tighten the quarter panel trim screws to 2 Nm (18 lb in).

3. Install the front door lock pillar molding to the pillar. Refer to Body Hinge Pillar Trim Panel Replacement Body Hinge Pillar Trim Panel Replacement.
4. Install the cargo door pillar molding to the pillar. Refer Body Hinge Pillar Trim Panel Replacement Body Hinge Pillar Trim Panel Replacement.
5. Install the rear blower motor trim cover.
6. Install the armrest to the quarter panel trim.
7. Install the armrest to the quarter panel trim screws.

Tighten
Tighten the quarter panel trim armrest screws to 2 Nm (18 lb in).

8. Install the rear seat.

Removal Procedure, Left Side

1. Remove the rear seat. Refer to Rear Seat Replacement Service and Repair.
2. Remove the spare tire cover.
3. Remove the spare tire and the jack.
4. Remove the spare tire rest trim covers.
5. Remove the spare tire rest bolts.
6. Remove the spare tire rest from the vehicle.
7. Remove the spare tire holder from the floor.
8. Remove the spare tire I-bolt from the vehicle.
9. Remove the armrest.
10. Remove the cargo door pillar moldings. Refer to Body Hinge Pillar Trim Panel Replacement Body Hinge Pillar Trim Panel Replacement.
11. Remove the intermediate seat belt to the rear door pillar bolt.
12. Remove the rear door lock pillar molding. Refer to Body Hinge Pillar Trim Panel Replacement Body Hinge Pillar Trim Panel Replacement.






13. Remove the quarter panel trim screws.
14. Remove the quarter panel trim from the vehicle.

Installation Procedure, Left Side






1. Install the quarter panel trim to the vehicle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the quarter panel trim screws.

Tighten
Tighten the quarter panel trim screws to 2 Nm (18 lb in).

3. Install the rear door lock pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement Body Hinge Pillar Trim Panel Replacement.
4. Install the intermediate seat belt anchor to the floor bolt.
5. Install the intermediate seat belt to the rear door pillar bolt.
6. Install the cargo door pillar trim panels to the pillar. Refer to Body Hinge Pillar Trim Panel Replacement Body Hinge Pillar Trim Panel Replacement.
7. Install the armrest.
8. Install the spare tire I-bolt to the vehicle.
9. Install the spare tire holder to the floor.
10. Install the spare tire rest to the vehicle.
11. Install the spare tire rest bolts.
12. Install the spare tire rest covers and the jack.
13. Install the spare tire.
14. Install the spare tire cover.
15. Install the rear seat. Refer to Rear Seat Replacement Service and Repair.