Throttle Cable/Linkage: Service and Repair

REMOVAL PROCEDURE




1. Remove the air inlet tube and resonator retaining wingnut.




2. Remove the air inlet tube and resonator from the throttle body by pivoting the air inlet tube and resonator upward until the hinge clip releases from the lip on the throttle body.




3. Remove the throttle cable from the throttle lever.




4. Remove the accelerator cable from the engine cable bracket.




5. Remove the accelerator cable from the cable routing bracket.




6. Remove the accelerator cable from the accelerator pedal (2).




7. Remove the accelerator cable from the dash panel (1).

INSTALLATION PROCEDURE




1. Install the accelerator cable to the dash panel (1).




2. Install the accelerator cable to the accelerator pedal (2).




3. Install the accelerator cable to the cable routing bracket.




4. Install the accelerator cable to the engine cable bracket.




5. Install the throttle cable to the throttle lever.




6. Align the hinge clip with the lip on the throttle body.

Install the air inlet tube and resonator to the throttle body by pivoting the air inlet tube and resonator downward until the mounting stud is through the hole in the air inlet tube.




7. Install the resonator retaining wingnut.