Rear Quarter Trim Panel Replacement (Crew Cab)

Rear Quarter Trim Panel Replacement (Crew Cab)

Removal Procedure

1. Remove the coat hook. Refer to Coat Hook Replacement Service and Repair.
2. Remove the seat belt guide.
3. Remove the seat belt retractor.
4. Remove the jack cover, the jack, the jack tray on the right side.
5. Remove the rear window lower garnish molding. Refer to Rear Window Lower Garnish Molding Replacement Rear Window Lower Garnish Molding Replacement.






6. Remove the quarter panel trim screws, pickup and extended cab only.
7. Remove the rear screw from the sill trim plate, pickup and crew cab only.
8. Remove the quarter trim panel (1).

Installation Procedure






1. Install the quarter trim panel (1).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the panel screws, pickup and crew cab only.

Tighten
Tighten the quarter panel trim screws to 2 Nm (18 lb in).

3. Install the rear screw into the sill trim plate.
4. Install the rear window lower garnish molding.
5. Install the jack tray, the jack, and the cover on the right side.
6. Install the seat belt retractor.
7. Install the seat belt guide.
8. Install the coat hook. Refer to Rear Window Lower Garnish Molding Replacement Rear Window Lower Garnish Molding Replacement.