Forward Servo Replacement

Removal Procedure
1. Lift the vehicle. Refer to Vehicle Lifting.
2. Remove the oil pan and filter. Refer to Automatic Transmission Fluid/Filter Changing.
3. Remove the six forward servo cover bolts, cover, and gasket.





4. Remove the following parts:
4.1. Forward servo piston pin (5).
4.2. O-ring seal (4).
4.3. Servo piston (3).
4.4. Retainer (2).
4.5. Piston spring (1).

Installation Procedure





1. Install the following parts:
^ Piston spring (1).
^ Retainer (2).
^ Servo piston (3).
^ O-ring seal (4).
^ Forward servo piston pin (5).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the six forward servo gasket, cover, and six bolts.
^ Tighten the bolts to 24 Nm (18 ft. lbs.).
3. install the oil pan and filter. Refer to Automatic Transmission Fluid/Filter Changing.
4. Lower the vehicle.