Console Replacement - Front Floor (Base)

REMOVAL PROCEDURE



1. Remove the front seats if you are removing the floor console bracket.
2. Open the console door.
3. Remove the screws connecting the floor console to the floor console bracket.




4. Remove the floor console (1).
5. Remove the floor console bracket (2).


INSTALLATION PROCEDURE



1. Position the floor console bracket (2) on the floor panel studs.

Notice: Refer to Fastener Notice in Cautions and Notices.




2. Install the screws inside the center console storage compartment connecting the floor console to the floor console bracket.

Tighten
Tighten the screws to 2 N.m (18 lb in).

3. Close the console door.
4. Install the front seats if necessary.