Front Door Window Glass: Service and Repair

REMOVAL PROCEDURE



1. Remove the trim panel.
2. Use a sharp bladed tool, if needed, in order to separate the water deflector at the perforations. Refer to Water Deflector Replacement - Front Door Service and Repair
3. Remove the lower run channel.
4. Remove the outer window sealing strip.
5. Roll the window half-way down.




6. Remove the window from the regulator (3):
6.1. Tip the edge of the window toward the front of the vehicle.
6.2. Tip the window in toward the inside of the frame (4).
7. Remove the window (1) from the door frame (4).

INSTALLATION PROCEDURE



1. Install the window (1) to the door frame (4).
2. Install the window to the regulator (3).




3. Install the lower run channel.
4. Install the water deflector.
5. Install the trim panel.