Courtesy Lamp/Reflector Replacement - Door

REMOVAL PROCEDURE
1. Gently push the lens toward the front edge of the door.
2. Lift the rear of the lens from the door by using a small flat tool.
3. Pivot the lens from the door in order to clear the retaining tab at the front edge.
4. Remove the bulb from the lens (if equipped).
5. Remove the lens from the vehicle.
6. Remove the bulb from the socket (if required for service).

INSTALLATION PROCEDURE
1. Install the bulb into the socket (if required for service).
2. Install the lens to the vehicle.
3. Install the bulb into the lens (if equipped).
4. Insert the tab on the lens into the slot in the door panel at the front edge.
5. Pivot the lens into the door panel.
6. Press the lens at the rear until the lens snaps into the door panel.