Full Length (Envoy)
REMOVAL PROCEDURE
1. Remove the front ashtray from the console by gently prying out the ashtray with a flat-bladed tool.
2. Carefully lift up on the wood shifter assembly close-out in order to remove the assembly from the console. Rotate the closeout panel in order to fit the panel over the shift handle.
3. Remove the passenger side toe-panel by gently prying out the panel with a flat-bladed tool.
4. Disconnect the instrument panel to console wiring harness connection.
5. Open the armrest in order to expose and remove the convenience tray from the storage compartment.
6. Remove the fasteners (2) that retain the console (1) to the shifter assembly and the vehicle floor.
7. Remove the console from the vehicle by lifting the console over the floor studs.
8. If replacing the center console, remove the compact disc player from the console.
9. Remove the amplifier from the console.
10. Remove the rear seat audio control from the console.
11. Remove and retain the console wiring harness for use on the new console.
INSTALLATION PROCEDURE
1. Install the console wiring harness to the console.
2. Install the rear seat audio control to the console
3. Install the amplifier to the console.
4. Install the compact disc player to the console.
IMPORTANT: Do not pinch the instrument panel to console wiring harness during this process.
5. Install the console to the vehicle by lifting the console (1) over and onto the floor studs.
6. Install the fasteners (2) that retain the console to the vehicle.
Tighten
Tighten the console to the vehicle retainers to 10 N.m (88 lb in).
7. Install the convenience tray to the armrest storage compartment.
8. Connect the instrument panel to console wiring harness connection.
9. Install the passenger side toe-panel by firmly pressing the panel into place.
10. Carefully press the wood shifter assembly close-out into place. Rotate the closeout panel in order to fit the panel over the shift handle.
11. Install the front ashtray to the console by firmly pressing the ashtray into place.