CD Changer: Service and Repair

REMOVAL PROCEDURE



1. Remove the compact disc magazine if one is inserted in the compact disc changer by pressing the EJECT button.

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

2. Remove the negative battery cable.
3. Remove the floor console from the vehicle.
4. Remove the compact disc changer cover retaining bolts.
5. Remove the compact disc changer cover from the console.




6. Remove the console wiring harness connector from the compact disc changer.
7. Remove the compact disc changer retaining bolts.
8. Remove the compact disc changer. Slide the compact disc changer up and back toward the center of the console.

INSTALLATION PROCEDURE



1. Install the compact disc changer.
Slide the compact disc changer into place between the retaining tabs.
2. Install the compact disc changer retaining bolts.

Tighten
Tighten the screws to 6 N.m (53 lb in).

3. Install the console wiring harness connector to the compact disc changer.




4. Install the compact disc changer cover to the console.
5. Install the compact disc changer cover retaining bolts.

Tighten
Tighten the screws to 1.9 N.m (53 lb in).

6. Install the floor console to the vehicle.
7. Install the negative battery cable.