C0895

CIRCUIT DESCRIPTION

The direct battery supply line (circuit 1640) provides the power to the module and motor circuitry.

This DTC detects a intermittent absence of battery voltage at the module when the module sees an ignition on voltage.

CONDITIONS FOR SETTING THE DTC

- The transfer case shift control module did not power LIP 8 out of the last 19 ignition cycles.

ACTION TAKEN WHEN THE DTC SETS

- There are no default actions associated with this DTC.
- The SERVICE AWD/4WD lamp will not be latched on.

CONDITIONS FOR CLEARING THE DTC

- Current DTC
- The transfer case shift control module will clear the DTC if the condition for setting the DTC no longer exists.
- History DTC
- Once 100 consecutive ignition cycles without a fault present.
- You issue a scan tool CLEAR CODES command.

Part 1 Of 2:

Part 2 Of 2:

TEST DESCRIPTION

The number(s) below refer to the step number(s) on the diagnostic table.

4. This step determines if an intermittent open exists in circuit 1640.
6. This step determines if an intermittent open exists in circuit 1640.