Fan Clutch: Service and Repair

FAN CLUTCH

REMOVAL PROCEDURE

^ Tools Required
- J 41240 Fan Clutch Wrench and Spanner
- J 41240-5A Fan Clutch Wrench

CAUTION: Do not use or attempt to repair a damaged cooling fan assembly. Replace damaged fans with new assemblies. An unbalanced cooling fan could fly apart causing personal injury and property damage.





1. Remove the air cleaner and the duct.
2. Remove the coolant recovery reservoir.
3. Remove the upper radiator shroud from the radiator.





4. Remove the fan hub nut from the water pump in a counterclockwise rotation using the J 41240-5A. Use the Spanner in order to hold the Pulley.





5. Remove the retaining bolts from the fan and clutch.
6. Remove the fan from the clutch.

INSTALLATION PROCEDURE





1. Install the fan to the clutch.
2. Install the retaining bolts to the fan and clutch.
^ Tighten the fan to clutch bolts to 33 Nm (24 ft. lbs.).

NOTICE: Refer to Fastener Notice in Service Precautions.





3. Install the fan and clutch using the J 41240. Use the Spanner in order to hold the pulley.
^ Tighten the nut to 57 Nm (42 ft. lbs.).





4. Install the upper radiator shroud.
5. Install the coolant recovery reservoir.
6. Install the air cleaner and the duct.