| Accuturn Brake Lathe | Spindle Speed | | 105 RPM |
| Depth of Cut | | As necessary |
| Tool Cross Feed (per rev) | | 0.003 Inch (in) |
| Tool Bit Nose Radius | | 1/64 |
| Vibration Dampener | | Yes |
| Ammco Brake Lathe | Rough Cut | Spindle Speed | 150 RPM |
| | Depth of Cut (per side) | 0.006 - 0.025 Inch (in) |
| | Tool Cross Feed (Per Revolution) | 0.01 Inch (in) |
| | Vibration Dampener | Yes |
| | Sand Rear Brake Rotor (Swirl Pattern) | No |
| Finish Cut | Spindle Speed | 150 RPM |
| | Depth of Cut (Per Side) | 0.004 - 0.006 Inch (in) |
| | Tool Cross Feed (Per Rev.) | 0.002 Inch (in) |
| | Vibration Dampner | Yes |
| | Sand Brake Rotor (Swirl Pattern) | Yes |