Inside Door Handle

Front Door Inner Handle Assembly:

Tool Required:
J 34940 Rivet Gun

Remove or Disconnect

1. Trim panel.
2. Water deflector.
3. Inside door handle assembly.
^ Drill out the rivet head using a 5-mm (3/16-inch) drill bit.
^ Slide door Handle forward.
4. Control rods from the handle and lock lever.

Install or Connect

1. Control rods to handle and lock lever.
2. Inside door handle.
^ Insert handle assembly into slot and slide assembly to the rear.
^ Handle rivet using J 34940.
3. Water deflector.
4. Trim Panel.