Below 8600 LBS. GVWR

REMOVE OR DISCONNECT
^ Raise and support the vehicle.
1. Oxygen sensor electrical connection(s).
2. Nuts and flange gaskets from Y-pipe and exhaust manifold.
3. Nuts and washers from Y-pipe flat flange.
4. Y-pipe and catalytic converter assembly.

INSTALL OR CONNECT
^ Position Y-pipe and catalytic converter assembly to flat flange.
1. Washers and nuts to flat flange studs.
^ Tighten nuts to 48 Nm (35 ft. lbs.).
2. Flange gaskets and nuts to exhaust manifold.
^ Tighten nuts to 65 Nm (48 ft. lbs.).
3. Oxygen sensor electrical connection(s).
^ Check for clearance and alignment.
^ Lower the vehicle.