Manual Gear Range Selection

The shift solenoids control the upshifts in the manual gear ranges.
Perform the following tests by accelerating at 10-15 degrees TPS.

Manual Third (D3)
With the vehicle stopped, move the gear selector to D3 and accelerate in order to observe the following conditions:
^ The 1-2 shift.
^ The 2-3 shift.
^ The TCC does not apply.

Manual Second (D2)
^ With the vehicle stopped, move the gear selector to D2 and accelerate in order to observe the 1-2 shift.
^ Accelerate to 56 km/h (35 mph) and observe the following conditions:
- The 2-3 shift does not occur.
- The TCC does not apply.

Manual First (D1)
With the vehicle stopped, move the gear selector to D1. Accelerate to 32 km/h (20 mph) and observe the following conditions:
- No upshifts occur.
- The TCC does not apply.

Reverse (R)
With the vehicle stopped, move the gear selector to R and slowly accelerate in order to observe that the 1-2 Shift Solenoid valve is ON