Assemble

^ Tools Required
- J 35748 Fuel Pump/Oil Pressure Switch Installation Socket, Or Equivalent





1. Install new oil bypass valves.





2. Install the oil filter fitting.
^ Tighten the oil filter fitting to 66 Nm (49 ft. lbs.).
3. After applying a water base caulk to the sensor threads, Install the knock sensor into the cylinder block.
^ Tighten the knock sensor to 19 Nm (14 ft. lbs.).





4. Install the fuel pump/oil pressure switch using fuel pump/oil pressure switch installation socket.
5. Install the oil gallery plugs.
^ Tighten the oil gallery plugs to 20 Nm (15 ft. lbs.).
6. Install the cooling jacket plugs.
7. Install the cylinder block cooling drain plugs.
^ Tighten the cylinder block drain plugs to 20 Nm (15 ft. lbs.).