Preliminary Information

The crankshaft bearings are of the precision insert type and do not use shims for adjustment. If the clearances are excessive, the new upper and the lower bearings will be: required. The service bearings are available in the standard size and an undersize.
^ 0.001 inch
^ 0.002 inch
^ 0.010 inch
^ 0.020 inch
The selective fitting of the-crankshaft bearings are necessary in production in order to obtain close tolerances. For this reason, you may use one-half of a standard crankshaft bearing with one-half of a undersize crankshaft bearing.
In order to determine the correct replacement bearing size, the bearing clearance must be measured accurately. Either the micrometer or plastic gauge method may be used, however, the micrometer method gives more reliable results and is preferred.