Engine Installation

1. Install the engine in the vehicle.
2. Install the engine mount through bolts and the nuts.
3. Install the transmission bolts to the engine.
4. Remove the lifting fixture, the chain and bolts.
5. Raise and suitably support the vehicle.
6. Install the flywheel to the torque converter.
7. Install the flywheel cover.
8. Install the starter motor.
9. Install the exhaust pipes at the exhaust manifolds.
10. Install the engine cooler lines to the retaining brackets.
11. Lower the vehicle.
12. Install the lower intake manifold.
13. Install the fuel supply lines to the bracket and the fuel rail.
14. Install the upper intake manifold.
15. Install the accelerator and the cruise control linkages.
16. Install the transmission shift cable connector.
17. Install the transmission oil level indicator tube.
18. Install the engine oil level indicator tube.
19. Install the generator.
20. Install the engine oil fill tube.
21. Connect the engine wiring harness and the connectors.
22. Install the air conditioning compressor.
23. Install the engine cooling fan.
24. Install the heater hoses.
25. Install the radiator support as an assembly.
26. Install the grille.
27. Install the coolant reservoir.
28. Install the front bumper.
29. Install the air cleaner assembly.
30. Install the engine cover.
31. Install the battery.
32. Install the proper quantity and grade of coolant. Refer to Draining and Filling Cooling System Engine Cooling.
33. Charge the A/C system. Refer to Heating and Air Conditioning.
34. Install the proper quantity and grade of engine oil.