Removal

Upper Intake Removal






1. Negative battery cable.
2. Air cleaner intake duct.
3. Wiring harness connectors and brackets and move aside.
4. Throttle linkage and bracket from upper intake manifold.
5. Cruise control cable, (if equipped).
6. Fuel lines from intake to the rear of the block.
7. PCV hose at upper intake manifold.
8. Ignition coil and bracket. Refer to: Service and Repair
9. Purge solenoid and bracket.
10. Upper intake manifold bolts and studs.
- Mark the location of all studs for proper reassembly.
11. Upper intake manifold.