P1125

Diagnostic Chart:

Wiring Diagram:

CIRCUIT DESCRIPTION
The Accelerator Pedal Position (APP) module provides a voltage signal that changes relative to accelerator pedal position. There are three sensors located within the APP module that are scaled differently. This is a type D DTC.

CONDITIONS FOR SETTING THE DTC
Powertrain Control Module (PCM) has recognized an intermittent APP fault and there are no other current APP faults stored.

ACTION TAKEN WHEN THE DTC SETS
Vehicle will operate at limited power.

CONDITIONS FOR CLEARING THE MIL/DTC
- A History DTC will clear when forty consecutive warm-up cycles that the diagnostic does not fail (coolant temperature has risen 5°C (40°F) from start up coolant temperature and engine coolant temperature exceeds 71°C (16O°F) that same ignition cycle.

DIAGNOSTIC AIDS
A DTC P1125 will set along with multiple APP DTCs. All other DTCs should be diagnosis first.

TEST DESCRIPTION
Number(s) below refer to the Step number(s) on the Diagnostic Table.

2. This Step determines if DTC P1125 is a hard failure or an intermittent condition.