Shift Shaft and Fork Assemblies

ASSEMBLIES





Clean (Figure 32)

All parts in a suitable solvent and air dry.

Inspect

Shift fork and inserts are serviced as an assembly only.
1. Shaft for wear or scoring.
2. Forks (100, 101 and 102) for wear, scoring, or distortion. The edges will turn black in color. This is a normal condition.
3. Shift lever and blockout bushing for wear.
4. Pins (105 and 113) for wear or distortion.
5. Shift shaft socket assembly (114) components for wear or distortion.

Important

Wear or distortion requires replacement of assembly and close inspection of mating parts.