Rear

REMOVE OR DISCONNECT
1. Negative battery cable.
2. Discharge and recover refrigerant from the system.
3. Rear quarter interior trim, as necessary.
4. Right rear quarter trim panel.
5. Right rear wheelhouse.
6. Rear heater hoses from auxiliary heater core (32), if equipped.
7. Auxiliary refrigerant hoses (20 and 21) from auxiliary evaporator (26).
8. Electrical connectors, as necessary.
9. Heater/evaporator case cover.
10. Evaporator core (26) from lower case.

INSTALL OR CONNECT
1. Evaporator core (26) to lower case.
2. Heater/evaporator case cover.
3. Electrical connectors, as necessary.
4. Auxiliary refrigerant hoses (20 and 21) to auxiliary evaporator (26).
5. Rear heater hoses to auxiliary heater core (32), if equipped.
6. Right rear wheelhouse.
7. Right rear quarter trim panel.
8. Rear quarter interior trim, as necessary.
9. Fill coolant to proper level.
10. Connect negative battery cable.
- Check the system for leaks.