Front

Remove or Disconnect









1. Battery ground cable.
2. Blower motor wiring harness at resistor (4) and motor connectors (5).
3. Five motor mounting screws.
4. Motor (13) and fan (15) assembly.
^ Gently pry on the blower flange if the sealer acts like an adhesive.
5. Shaft nut (16).
6. Fan (15) from the motor (13).
7. Nut (210) from motor (13).

Install or Connect

1. Nut (210) from motor (13).
2. Fan (15) from the motor (13).
^ Locate the open end of the wheel away from the blower motor.
3. Shaft nut (16).
4. New bead of permagum sealer on the flange.
5. Motor (13) and fan (15) assembly to the case (14).
6. Five motor mounting screws.
7. Blower motor wiring harness.
^ Resistor connector (4).
^ Motor connector (5).
8. Battery ground cable.
^ Check motor (13) for proper operation.