Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Label, Claim and Letter Information




CAMPAIGN IDENTIFICATION LABEL

Each vehicle corrected in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label." Each label provides a space to include the five digit dealer code of the dealer performing the campaign service. This information may be inserted with a typewriter or ballpoint pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for periodic servicing by the owner.

Apply "Campaign Identification Label" only on a clean dry surface.
CLAIM INFORMATION

Submit a Product Campaign Claim with the information indicated below:


FAILED PARTS LABOR LAB OTH*
REPAIR PERFORMED PC PART NO. ALLOW FC OP HRS HRS

Replace Jumper Wire 00 V4040 0.5 0.1


* Campaign Administrative Allowance

Dealers will automatically receive the correct labor and material allowance based on the labor operation performed.

Refer to the Chevrolet Claims Processing Manual for details on Product Campaign Claim submission.
Dear Chevrolet Owner:

General Motors has determined that some 1987 Chevrolet S/T 10 trucks equipped with 2.5L engines may have been built with an engine electrical harness which has a cracked wire terminal on a jumper wire in the Electronic Control Module (ECM) connector. As part of the fuel injector signal circuit, if the terminal breaks and causes an open circuit, this will allow the engine to crank but not start.

To prevent this condition from occurring it will be necessary to replace the jumper wire, which has terminals attached.

Instructions and parts for this correction have been sent to your Chevrolet dealer. Please contact your Chevrolet dealer to arrange a service date to have the wire installed. This service will be performed at no charge to you.

The labor time to service your vehicle is approximately 30 minutes. Please ask your dealer if you wish to know how much additional time will be needed to process your vehicle.

The enclosed owner reply card identifies your vehicle. Presentation of this card to your dealer will assist them in completing the necessary correction to your vehicle in the shortest possible time. If you have sold or traded your vehicle, please let us know by completing the postage paid owner reply card and returning it to us.

We are sorry to cause you this inconvenience; however, we have taken this action in the interest of your safety and continued satisfaction with our products.