Front Crankshaft Seal: Service and Repair

Crankshaft Front Oil Seal Replacement

Special Tools
* EN-29184 - Oil Seal Installer
* EN-45000 - Seal Remover

For equivalent regional tools, refer to Special Tools Special Tools.

Removal Procedure




1. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement Service and Repair.
2. Using EN-45000 - Seal Remover (1) remove the crankshaft oil seal (2).

Installation Procedure





Note: Do not lubricate the crankshaft front oil seal or the crankshaft balancer sealing surfaces.

1. Use the EN-29184 - installer (1) or equivalent to install the crankshaft front oil seal (2).
2. Install the crankshaft balancer. Refer to Crankshaft Balancer Replacement Service and Repair.