Lumbar Bladder Replacement

Lumbar Bladder Replacement

The lumbar pump, bladder and control module are separate units that are attached to each other by a wire harness and a hose. They are supplied and replaced as an assembly. The lumbar pump is contained in a vinyl pouch under the seat and is tie strapped to the seat adjuster torque tube. The attached control module is contained in a vinyl pouch and is secured with J strips to the bottom of the seat support springs. If the bladder needs to be replaced the unit must be replaced as a lumbar subsystem. Refer to Seat Lumbar Sub System Replacement (Seat Lumbar Sub System Replacement).