Hood Open Assist Rod Stud Replacement

Hood Open Assist Rod Stud Replacement

Removal Procedure

1. Open the hood.




Warning: Refer to Hood Hold-Open Device Warning (Service Precautions).

2. Release the clip retaining the hood assist rod to the lower hood assist rod ball stud. Refer to Hood Open Assist Rod Replacement (Service and Repair).
3. Remove the lower hood assist rod ball stud (1) from the front structure (2).

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the lower hood assist rod ball stud (1) to the front structure (2) and tighten to 9 Nm (80 lb in).
2. Install the hood assist rod. Refer to Hood Open Assist Rod Replacement (Service and Repair).
3. Insure that the clip is fully seated on the hood assist rod.
4. Close the hood.