Instrument Panel Compartment Trim Bezel Replacement

Instrument Panel Compartment Trim Bezel Replacement

Removal Procedure




1. Remove the striker from the I/P compartment. Refer to Instrument Panel Compartment Door Lock Striker Replacement (Service and Repair).
2. Remove the retaining screws which attach the trim bezel to the I/P compartment.
3. Pull the trim bezel outward to access the electrical connectors.
4. Remove the valet lockout switch from the trim bezel.
5. Remove the bezel from the I/P compartment.

Installation Procedure




1. Align the trim bezel to the I/P compartment.
2. Install the valet lockout switch to the bezel.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the retaining screws to the trim bezel and tighten to 1.9 Nm (17 lb in).
4. Install the striker to the I/P compartment. Refer to Instrument Panel Compartment Door Lock Striker Replacement (Service and Repair).